![A picture of the A1 3D printer.](https://cdn.vox-cdn.com/thumbor/vDsf7dDv00hTV61crUBYwQr_5do=/742x0:4258x2344/1310x873/cdn.vox-cdn.com/uploads/chorus_image/image/73111876/Bambu_Lab_A1_Printer.0.jpeg)
Bambu Lab is formally recalling all A1 3D printers (not counting the A1 Mini). The corporate “strongly” urges house owners to cease utilizing it for security causes after it was alerted to “unstable temperature readings” that it first traced to a defective heatbed cable final week, as reported by Tom’s {Hardware}. After additional investigation, Bambu says “lower than 0.1% of all of the A1 printers bought” are affected by the issue, however it might’t say with 100 p.c certainty what the trigger is, so it’s providing a full refund to any A1 proprietor who needs it.
The corporate isn’t recalling some other printers in its lineup, so in the event you personal an X1 collection, P1 collection, or the A1 Mini that our personal Sean Hollister referred to as “nearly the simple button” of printers.
Right here’s a TL;DR of…
Proceed studying…